Hi everyone - I am excited to announce that I have launched the Passioned Flower website.
All things Passioned Flower including the shop and blog can now be found at www.passionedflower.com.
Showing posts with label setupshop. Show all posts
Showing posts with label setupshop. Show all posts
Sunday, 25 September 2016
Tuesday, 1 March 2016
Milk Fibre and Bamboo
I am wanting to introduce different yarn blends in to my shop. To do this I need to firstly source different blends. I am aiming to use primarily Australian and New Zealand milled and grown yarns. To do this I have been researching the limited number of mills in Australia and finding out what un-dyed products they have in their range. Next step is to order small quantities of potential bases, dye them and knit with them to find out if I like them enough to be comfortable selling them as part of my range.
Batch 1
This past week I purchased three new to me blends, two are bamboo & wool blends (with different percentages of each) and the other is a milk fibre and wool blend.
First a little about these different fibres:
Milk Fibre
As the name suggests milk fibre comes from milk. It is created as a by-product of processing skim milk. A chemical process is used to extract, dry and then turn a powdered protein in to a fiber. It was first used during the 1930s and 40s to make wool and cotton go further. It is said to have anti-bacterial qualities and take colour very well (the protein in milk fibre was also known to be used in early outdoor paint).
Bamboo
Yes, the grass that Panda's eat! The insides of the stems are processed down and made into a fibre, it has a shiny finish similar to silk. It gives strength when combined with wool, while keeping a drape and breath ability.
My Experiment
In order to test out the new blends I put all three in to the same dye bath (labelled with brightly coloured yarn that would not change colour) and did two different dyeing methods.
In order to test out the new blends I put all three in to the same dye bath (labelled with brightly coloured yarn that would not change colour) and did two different dyeing methods.
Batch 1
First batch I dyed up in Strawberry Shortcake (a repeatable colour that I already have in the shop). This was so that I could compare how the colour takes between my current sock yarn (Gumboot Sock) and the three new bases. Look how differently it comes out across the yarns!
| LtoR: Gumboot Sock, 16% milk fibre/85% wool, 50% bamboo/50% wool, 60% bamboo /40% wool |
Batch 2
Next I chose to have a play. I tried some shallow immersion dyeing and squirted some dye onto different sections of the yarn, to see how the dyes would absorb and blend on each fibre. Again, some extremely varied results.
| LtoR: 16% milk fibre/85% wool, 50% bamboo/50% wool, 60% bamboo/40% wool |
The milk fibre yarn took up the dye a lot more than the bamboo, it is quite vibrant and dark. Of the other two, the one with the lower bamboo content seemed to take the colour better, but the one with more bamboo is a lot shinier and has more drape (this could also be due to the spinning method of the yarn as well, the 50/50 blend is a crepe style yarn, which is a bit more dense). The sheen and drape of the bamboo yarn is really lovely. I am looking forward to knitting with each of these blends to see how they work up.
Will any of these blends end up in the shop? Will have to wait and see how I like the finished projects.
Anyone who as worked with these fibres before I would be interested to get your feedback and thoughts.
Anyone who as worked with these fibres before I would be interested to get your feedback and thoughts.
Location:
Australia
Sunday, 8 November 2015
Polwarth Yarn
I have purchased some 100% Polwarth yarn for the shop. I have found as a knitter in Australia most of the yarn that is readily available is either Merino or labelled as just "wool". Part of the appeal of moving into dyeing my own yarn is that I can experiment with yarn compositions, combine my own colours and knit with yarn that I have never knit with before (after all I do need to sample the yarn first!!). Hopefully as I develop my shop I can expand my bases to include interesting breeds and blends, expand my own knitting experience and be able to make it accessible to other crafters.
Here is a little summary of exactly what Polwarth is:
Here is a little summary of exactly what Polwarth is:
- developed in Victoria (Australia) in 1880s
- bred from one-quarter Lincoln and three-quarters Merino
- they have long, soft, fine wool and also are a good meat sheep
I began to work with it this weekend, dyeing up my first batch. I am excited to see how the finished yarn turns out, how it feels, looks and knits up.
Tuesday, 3 November 2015
Set up Shop
The set up show e-course finished at the end of October. It was an information packed month of daily emails and interesting discussions on Facebook.
I have learned a lot and gained encouragement and confidence.
A big thing that stuck in my mind from doing the course was that your business will never be finished or perfect, so I have decided to stop preparing and today I opened my shop (you can click on the tab at the top of the page and go there now for a look!).
It is a big leap of faith. Will anyone like my colourways? Will anyone choose to spend their hard earned money to buy my yarn? Have I properly figured out my shipping methods? Are all the elements of my shop set up? I guess only time will tell.
A new phase of learning and development now starts and I am excited to see where it takes me.
I have learned a lot and gained encouragement and confidence.
A big thing that stuck in my mind from doing the course was that your business will never be finished or perfect, so I have decided to stop preparing and today I opened my shop (you can click on the tab at the top of the page and go there now for a look!).
It is a big leap of faith. Will anyone like my colourways? Will anyone choose to spend their hard earned money to buy my yarn? Have I properly figured out my shipping methods? Are all the elements of my shop set up? I guess only time will tell.
A new phase of learning and development now starts and I am excited to see where it takes me.
Labels:
colour,
craft,
createandthrive,
dreams,
dyeing,
etsy,
hobbies,
indiedyer,
inspiration,
knitting,
learning,
Ravelry,
setupshop,
work,
yarn
Sunday, 18 October 2015
Rest Day and Course Progress
Today is the second "rest day" of the Set up Shop e-course. We are two-thirds of the way through and I am enjoying the process of taking time each day to focus on an aspect of my new venture.
We have covered off a lot of topics including: branding, product descriptions, packaging, postage, pricing, photography, shop about page and policies, order systems, and financial records.
I have made a little progress every day, getting all the details sorted out. Some days of the course I have felt quite comfortable with, like setting up an organisation system for emails and financial recording - I was able to get these sections done quickly and without much thought. Other topics have taken multiple days, numerous drafts and much more thought.
Today I wrote a template for the product descriptions for the shop. I am also going to keep a separate file that contains a description of each colourway. I can then combine these two files to use when I list a yarn.
Another thing I tackled today was designing my ball bands. I have gone fairly basic, using my passioned flower image on the left hand side and incorporating all the details in the white space on the right. Not sure that this will be the final version, but I'm happy with what I have been able to come up with (you will have to wait for the shop launch to check them out).
I still have a lot of work to do - I need to re-work my policy page, finish my list of tags, properly research postage and packaging costs plus there is still several more lessons to go. I am loving every minute I spend on this and excited to see where it will take me.
We have covered off a lot of topics including: branding, product descriptions, packaging, postage, pricing, photography, shop about page and policies, order systems, and financial records.
I have made a little progress every day, getting all the details sorted out. Some days of the course I have felt quite comfortable with, like setting up an organisation system for emails and financial recording - I was able to get these sections done quickly and without much thought. Other topics have taken multiple days, numerous drafts and much more thought.
Today I wrote a template for the product descriptions for the shop. I am also going to keep a separate file that contains a description of each colourway. I can then combine these two files to use when I list a yarn.
Another thing I tackled today was designing my ball bands. I have gone fairly basic, using my passioned flower image on the left hand side and incorporating all the details in the white space on the right. Not sure that this will be the final version, but I'm happy with what I have been able to come up with (you will have to wait for the shop launch to check them out).
I still have a lot of work to do - I need to re-work my policy page, finish my list of tags, properly research postage and packaging costs plus there is still several more lessons to go. I am loving every minute I spend on this and excited to see where it will take me.
Labels:
colour,
craft,
createandthrive,
dreams,
dyeing,
etsy,
hobbies,
indiedyer,
inspiration,
knitting,
learning,
Ravelry,
setupshop,
work,
yarn
Subscribe to:
Posts (Atom)

