Dyeing yarn has become a huge part of my life now, but when I started out I was not sure what I was doing. I taught myself through experimentation, reading blogs and forums and watching podcasts.
I thought I would share a little of what I do - especially for those of you out there who see it as a mysterious and complicated thing. This is certainly not a comprehensive guide or the only way to dye, it is just a little of what I have taught myself.
1. Start with undyed/bare yarn - I have some yarn that comes in pre-measured skeins, like the ones in the top left, but I also buy yarn in larger hanks and on cones, that I wind off into skeins myself. I add additional ties to each skein to stop it from tangling.
2. I use Jacquard acid dyes - these are a powder dye, activated by acid (vinegar or citric acid). I currently have 12 different colours. I use a dust mask to protect myself while mixing the powdered dyes and make a stock of each colour (a mix of the powder and water) that I keep in squeeze bottles. Then when creating colourways, I mix the stock dyes together to create unique colours. I write down each of my recipes in a note book, with steps for each layer of dye.
3. To prepare the yarn for dyeing, I soak it in slightly warm water and a little bit of wool soap.
4. Most of the time when I dye I have an end result colour in mind, the example above is my Fuchsia colourway. I took a photo of the flower from my garden and mixed the dyes with the end result in mind.
5. I measure out the dye, writing down my recipe as I go, and add it to the pot, along with vinegar and turn on the heat. I then add the wet skeins of yarn to the pot and allow the dye to absorb, keeping the water at a steady heat just below a simmer. Once the water is clear (or close to it) I remove the yarn and add another dye mixture. I usually then unravel, or re-twist the yarn, to expose different sections to the dye and place it back into the pot. Depending on the colour I could repeat this part of the process a number of times.
6. Once the final layer of colour has been applied I keep the heat on for a little longer and then put the lid on and turn off the heat. I leave the yarn in the pot and leave it to cool. This stage allows any remaining dye to be taken up by the yarn and provides residual heat to set the colour.
7. When the yarn is cool, I drain off the water and rinse, before leaving it to soak in slightly warm water and a wool soap. This removes any excess dye and washes away any vinegar.
8. Next is to get the yarn dry. For my superwash wool I give it a little spin in the washing machine (in a delicates bag) and then hang it over a drying racks to get plenty of airflow. I rotate the skeins to help them dry evenly.
9. Final stage once the yarn is dry is to rewind the yarn back into a neat skein. I cut all of the ties and wind it into a skein. This realigns the colours and tidies up the skein after going through the dyeing process.
As I mentioned earlier, this is just one way that I use and I am mostly self taught. There are so many ways to dye, you can be very scientific or very relaxed and organic.
Showing posts with label Ravelry. Show all posts
Showing posts with label Ravelry. Show all posts
Tuesday, 8 December 2015
Tuesday, 3 November 2015
Set up Shop
The set up show e-course finished at the end of October. It was an information packed month of daily emails and interesting discussions on Facebook.
I have learned a lot and gained encouragement and confidence.
A big thing that stuck in my mind from doing the course was that your business will never be finished or perfect, so I have decided to stop preparing and today I opened my shop (you can click on the tab at the top of the page and go there now for a look!).
It is a big leap of faith. Will anyone like my colourways? Will anyone choose to spend their hard earned money to buy my yarn? Have I properly figured out my shipping methods? Are all the elements of my shop set up? I guess only time will tell.
A new phase of learning and development now starts and I am excited to see where it takes me.
I have learned a lot and gained encouragement and confidence.
A big thing that stuck in my mind from doing the course was that your business will never be finished or perfect, so I have decided to stop preparing and today I opened my shop (you can click on the tab at the top of the page and go there now for a look!).
It is a big leap of faith. Will anyone like my colourways? Will anyone choose to spend their hard earned money to buy my yarn? Have I properly figured out my shipping methods? Are all the elements of my shop set up? I guess only time will tell.
A new phase of learning and development now starts and I am excited to see where it takes me.
Labels:
colour,
craft,
createandthrive,
dreams,
dyeing,
etsy,
hobbies,
indiedyer,
inspiration,
knitting,
learning,
Ravelry,
setupshop,
work,
yarn
Sunday, 18 October 2015
Rest Day and Course Progress
Today is the second "rest day" of the Set up Shop e-course. We are two-thirds of the way through and I am enjoying the process of taking time each day to focus on an aspect of my new venture.
We have covered off a lot of topics including: branding, product descriptions, packaging, postage, pricing, photography, shop about page and policies, order systems, and financial records.
I have made a little progress every day, getting all the details sorted out. Some days of the course I have felt quite comfortable with, like setting up an organisation system for emails and financial recording - I was able to get these sections done quickly and without much thought. Other topics have taken multiple days, numerous drafts and much more thought.
Today I wrote a template for the product descriptions for the shop. I am also going to keep a separate file that contains a description of each colourway. I can then combine these two files to use when I list a yarn.
Another thing I tackled today was designing my ball bands. I have gone fairly basic, using my passioned flower image on the left hand side and incorporating all the details in the white space on the right. Not sure that this will be the final version, but I'm happy with what I have been able to come up with (you will have to wait for the shop launch to check them out).
I still have a lot of work to do - I need to re-work my policy page, finish my list of tags, properly research postage and packaging costs plus there is still several more lessons to go. I am loving every minute I spend on this and excited to see where it will take me.
We have covered off a lot of topics including: branding, product descriptions, packaging, postage, pricing, photography, shop about page and policies, order systems, and financial records.
I have made a little progress every day, getting all the details sorted out. Some days of the course I have felt quite comfortable with, like setting up an organisation system for emails and financial recording - I was able to get these sections done quickly and without much thought. Other topics have taken multiple days, numerous drafts and much more thought.
Today I wrote a template for the product descriptions for the shop. I am also going to keep a separate file that contains a description of each colourway. I can then combine these two files to use when I list a yarn.
Another thing I tackled today was designing my ball bands. I have gone fairly basic, using my passioned flower image on the left hand side and incorporating all the details in the white space on the right. Not sure that this will be the final version, but I'm happy with what I have been able to come up with (you will have to wait for the shop launch to check them out).
I still have a lot of work to do - I need to re-work my policy page, finish my list of tags, properly research postage and packaging costs plus there is still several more lessons to go. I am loving every minute I spend on this and excited to see where it will take me.
Labels:
colour,
craft,
createandthrive,
dreams,
dyeing,
etsy,
hobbies,
indiedyer,
inspiration,
knitting,
learning,
Ravelry,
setupshop,
work,
yarn
Wednesday, 16 September 2015
Knitrospective - Shawls
What makes a great shawl? Colour? Shape? Size? Lace? Beads? Garter?
Shawls are a regular in my knitting rotation. I have a lot in my queue and library. Once I have completed one I am searching for the next one to cast on.
They are go-to accessory pieces, especially for my work wardrobe. Essential for combating the chill of air-conditioning and also for adding the "knitterly touch" to my outfits.
I began with small, one skein shawls like the Multnomah by Kate Ray, Mizzle by Patricia Martin and Pimpelliese by Christine Ebers.
I now enjoy larger multi-coloured, lace or beaded shawls. Although there is always a place for a more simple, one skein shawl in the knitting rotation (my recently knitted Reyna is an example of this).
Nuvem has been on my needles twice, and could definitely be knit again.


The two most intricate shawls I have knit have not been for me, but made as special gifts. The My Hope for my sister on her wedding day and Bella Botanica for my mother-in-law for Christmas. Both had beading and lace work and I loved the process of knitting each of them. I know both have been worn numerous times, which makes me happy. What I am disappointed about it that in both cases I never took proper finished object pictures, only progress and blocking shots.
I think I will at some stage have to knit a lace and bead shawl for myself, but at the moment I am enjoying the squishy garter and fun colour combinations from patterns like Drachenfels and Moonraker by Melanie Berg.
A shawl that was in my queue for a very long time was Bloom, which I finished earlier this year. I wrote a full blog post on the finished object. I have worn it at work and received many compliments - it has some wow factor. I am thinking about yarn combinations for another one.
So what is the best kind of shawl? It's much too difficult to decide, I guess I will have to keep knitting more to try out more patterns, colour combinations, shapes and techniques.
Shawls are a regular in my knitting rotation. I have a lot in my queue and library. Once I have completed one I am searching for the next one to cast on.
They are go-to accessory pieces, especially for my work wardrobe. Essential for combating the chill of air-conditioning and also for adding the "knitterly touch" to my outfits.
I began with small, one skein shawls like the Multnomah by Kate Ray, Mizzle by Patricia Martin and Pimpelliese by Christine Ebers.
| Pimpelliese |
Nuvem has been on my needles twice, and could definitely be knit again.
| My Hope |
The two most intricate shawls I have knit have not been for me, but made as special gifts. The My Hope for my sister on her wedding day and Bella Botanica for my mother-in-law for Christmas. Both had beading and lace work and I loved the process of knitting each of them. I know both have been worn numerous times, which makes me happy. What I am disappointed about it that in both cases I never took proper finished object pictures, only progress and blocking shots.
| Moonraker |
| Bloom |
Sunday, 30 August 2015
Digging into the stash - knitting with that "special skein"
After taking the time to review my stash in preparation for Bendigo (see previous post), I rediscovered some amazing yarn. Not forgotten, more like I had moved it to the back because I did not know what to do with it and felt that it was too special to knit with.
I found a simple shawl pattern on Ravelry; Reyna by Noora Laivola. I liked that it had garter and some lace sections, without being a complicated pattern. As I wanted the yarn to be the star.
During this dig into the stash, I also realised how many partial skeins I have. Leftovers from socks and shawls, but not enough to think of as scraps. So out came the scales and I weighed the portions that I had, sorting them into size piles as I went. The Moonraker Shawl, by Melanie Berg, seemed like the perfect way to incorporate a couple of my smaller skeins into a large project.
My small skeins are from two projects that I really enjoyed. They are a sparkly purple left over from my Low Tide Cardigan and a sparkly blue/grey from the My Hope shawl I made my sister for her wedding.
Sunday, 9 August 2015
Finished Object - Bloom Shawl
It was so great to come back from Bendigo with yarn for specific projects and so motivating to cast on straight away.
When I arrived home on the Sunday afternoon I immediately balled up the charcoal and teal corriedale I had purchased for Colleens Crafts to make the Bloom Shawl by Kiri FitzGerald-Hillier.
The version of the pattern I followed is the original as it was published in Issue 31 of Yarn Magazine.
My default for reading patterns is the written instructions and then referring to a chart, if provided, as a reminder guide as I complete each round. After completing this pattern, my advice for anyone else is to follow the charts, as the written directions seem to be inaccurate or at least confusing in parts.
First thing I did was find a tutorial on how to do the pinhole cast on - I used the one from Very Pink Knits. It took me a couple of tries to get it right but overall not a hard thing to master.
.
The directions were for 5 dpns, but I knit the whole motif on magic loop. One thing that was not clear in the written directions was where to place markers - to split the motif into its four sections. If I had realised this earlier I would have been able to get this information from the chart. I guessed a little as I went along and I think in the end it is not noticeable that I fudged it a bit.
I made several modifications in the wing sections. For the decreases on both the left and right wings I knit two together through the back loop. I tried a few different decreases and decided that in the garter stitch I liked the look of this method best. I flipped the wings, so that the decrease side was the top edge, the finish and angle of the wing seemed to lay better that way. I also connected the blacks at the top of the motif together by knitting the last black stitch of one wing with the first black stitch of the other.
This was a super quick knit - it took me 15 days and zoomed along. I think part of the reason for this, apart from being knit in a DK, was that until you get to the edging there are really not many stitches on the needles, so the rows are short.
In the end I used all but 8 grams of the charcoal (from 213 grams). I do have plenty of the teal left, having only used 40 grams of a 100 gram skein.
I wet blocked the shawl, using blocking wires on the motif to make it square. Then pinned the wings and edge into shape around that square. I also pinned out each point of the lace pattern.
When I arrived home on the Sunday afternoon I immediately balled up the charcoal and teal corriedale I had purchased for Colleens Crafts to make the Bloom Shawl by Kiri FitzGerald-Hillier.
The version of the pattern I followed is the original as it was published in Issue 31 of Yarn Magazine.
My default for reading patterns is the written instructions and then referring to a chart, if provided, as a reminder guide as I complete each round. After completing this pattern, my advice for anyone else is to follow the charts, as the written directions seem to be inaccurate or at least confusing in parts.
First thing I did was find a tutorial on how to do the pinhole cast on - I used the one from Very Pink Knits. It took me a couple of tries to get it right but overall not a hard thing to master.
.
The directions were for 5 dpns, but I knit the whole motif on magic loop. One thing that was not clear in the written directions was where to place markers - to split the motif into its four sections. If I had realised this earlier I would have been able to get this information from the chart. I guessed a little as I went along and I think in the end it is not noticeable that I fudged it a bit.
I made several modifications in the wing sections. For the decreases on both the left and right wings I knit two together through the back loop. I tried a few different decreases and decided that in the garter stitch I liked the look of this method best. I flipped the wings, so that the decrease side was the top edge, the finish and angle of the wing seemed to lay better that way. I also connected the blacks at the top of the motif together by knitting the last black stitch of one wing with the first black stitch of the other.
This was a super quick knit - it took me 15 days and zoomed along. I think part of the reason for this, apart from being knit in a DK, was that until you get to the edging there are really not many stitches on the needles, so the rows are short.
I wet blocked the shawl, using blocking wires on the motif to make it square. Then pinned the wings and edge into shape around that square. I also pinned out each point of the lace pattern.
Saturday, 25 July 2015
The Bendigo Haul
| Shawl pins from All Buttoned Up |
Did I stick to my list? Pretty much.
I have added all my new yarn to my Ravelry stash already, but wanted to do a blog post to highlight all the great vendors.
Needles and cables - all purchased from Fiberific!.
Two ChiaoGoo "Spin Cables", 75cm and 125cm. For most things I prefer these over the red twist cable as the are more flexible and they spin at their base which I really like.
| Wool N Wire stitch markers |
Accessories and stitch markers
Two shawl pins from All Buttoned Up - Vintage Jewellery Melbourne.
A set of blinglets medium sized stitch markers from Fiberific!
A set of stitch markers from Wool N Wire
Yarn
Dyed by Hand Yarns (top three skeins):
White Gum Wool DK - 2 skeins in Purple Sea Urchin
Tough Stocking (4ply)- 1 skein in Blue Ringed Octopus
Tough Stocking (4ply) - 1 skein in a "one hit wonder" purple colourway
Colleens Crafts (first two, bottom row left to right) :
Corriedale DK - 2 skeins in Sage Green Tones
Corriedale DK - 2 skeins in Charcoal
Mayhem & Chaos (middle right and bottom right):
Crazy Eights (DK/8ply) - Voodoo Lady - enough for a sweater (thinking this will be the main colour for the Pixelated Pullover)
Lollisox - Taste the Rainbow - sample of fingering weight
Thursday, 16 July 2015
What to wear to Bendigo?
A quick post this week, as I prepare to
head to Bendi this weekend.
The shopping list is prepared. I have added some tools to the list too; additional Chiagoo
needle tips and the twist cables.
Travel plans are set. I am driving to a
friends on Friday afternoon to catch up, craft and have some wines.
Saturday we are driving to Bendigo together, then back to her house
to “play” with our purchases.
Final thing to sort out, I think is the
toughest – what am I going to wear!?!?
I have three suitably warm knit tops.
Miranda, Charleston Tea and Tric. Yarns for all three of these projects were purchased from previous Bendigo trips. They are all comfortable and I'm really pleased with them and proud
to show them off. So I am thinking I may pack all three and decide on the day.
The hardest part to choose is the rest of the
outfit and knit accessories. Victoria has been experiencing an
extremely wet and cold winter, and Bendigo has a reputation for being
extremely cold. Gloves, scarf, beanie etc will be essential.
But how much knit is too much knit?? Is there such a thing? Also need
to keep in mind that I will probably also need a coat (which then
covers up all the knitting) and I think gumboots will be the
footwear of choice (with hand knit socks of course). My blanket box is full of choices, will be hard to decide. I may end up taking a lot of this with me!!
| How do I choose what to wear from so many knitted accessories?? |
Wednesday, 8 July 2015
Thoughts of Bendigo Sheep and Wool Festival
It's dark and it's cold! You would think the perfect time for knitting. But I am making slow progress. A couple of reasons come to mind; my hands are cold at home, so I find it hard to knit, but the more prominent reason is that I want to knit all the things. Distracted by thoughts of the up-coming Bendigo Sheep and Wool Festival next weekend.
So what has been taking up what should be knitting time? Knit planning!!
I know that I want to knit more sweaters and multicoloured shawls. At the moment whenever I look on Ravelry, these are what I am drawn towards.
I am really enjoying wearing my current selection of coloured shawls as they are great fashion pieces and practical for keeping warm in cool air-conditioned offices. And as far as garments are concerned I feel that I have only just begun to get into this part of knitting and want to expand my wardrobe for more occasions and weather.
My library, queue and favourites are already filled with projects that I have added over time. I have been going through each of these areas as a starting point for new projects, especially from my library. It is amazing how many patterns are in my library that I have not yet knit, I purchased them because I liked them and intended to knit them but they have been left unloved and unknit. I am not the world's fastest knitter, so this will not be rectified in the short term, but at least I have reminded myself that when I have an urge to cast something on I should check my library first.
So what stands out to me now?
I also want to knit multi-coloured shawls and have a collection of them in my library (mostly by Melanie Berg).
I have looked at my stash, and I have potential yarns for coloured shawls, lots of single sock skeins, but nothing in stash for the sweaters. It is interesting to reflect and review the stash. I will take a deeper look at stash in another post in the coming weeks (maybe after I have added to it at Bendigo and need to do a proper update/audit of everything!).
My lists are almost complete. I have made notes on yardage and yarn types for these projects and also have in mind a rough idea of colours. But once I am in the midst of all that yarn I know I will get carried away and probably come home with some skeins that are pretty rather than practical. That is, of course, all part of the fun.
So what has been taking up what should be knitting time? Knit planning!!
I know that I want to knit more sweaters and multicoloured shawls. At the moment whenever I look on Ravelry, these are what I am drawn towards.
I am really enjoying wearing my current selection of coloured shawls as they are great fashion pieces and practical for keeping warm in cool air-conditioned offices. And as far as garments are concerned I feel that I have only just begun to get into this part of knitting and want to expand my wardrobe for more occasions and weather.
My library, queue and favourites are already filled with projects that I have added over time. I have been going through each of these areas as a starting point for new projects, especially from my library. It is amazing how many patterns are in my library that I have not yet knit, I purchased them because I liked them and intended to knit them but they have been left unloved and unknit. I am not the world's fastest knitter, so this will not be rectified in the short term, but at least I have reminded myself that when I have an urge to cast something on I should check my library first.
So what stands out to me now?
I also want to knit multi-coloured shawls and have a collection of them in my library (mostly by Melanie Berg).
I have looked at my stash, and I have potential yarns for coloured shawls, lots of single sock skeins, but nothing in stash for the sweaters. It is interesting to reflect and review the stash. I will take a deeper look at stash in another post in the coming weeks (maybe after I have added to it at Bendigo and need to do a proper update/audit of everything!).
My lists are almost complete. I have made notes on yardage and yarn types for these projects and also have in mind a rough idea of colours. But once I am in the midst of all that yarn I know I will get carried away and probably come home with some skeins that are pretty rather than practical. That is, of course, all part of the fun.
Tuesday, 30 June 2015
Cupcake mittens, deadlines and making changes to the pattern
My sister requested that I make her Cupcake Mittens.They looked super cute, so agreed that I would give them a go.
I am satisfied with the end result and pretty happy with my colour work, but these were a hard slog.
The beginning of this project caused me frustration. I had trouble getting gauge, first they were too loose, then they were too tight - playing with needle size and stitch counts until I on the fourth try I was happy with the cuff. I also found that by knitting the cupcakes on the palm as well as the back of the hand the mitt was very tight (partly I think due to my inexperience in colour work). So I chose to rip back to the cuff and change the pattern. I knit the cupcakes on only the back of the hand, five on the first row, four on the next and then alternated those two rows. I also knit three plain rows in between, in order to give myself a break from the colour work, provide an opportunity to knit in ends as I went and to hopefully prevent the overall mitten from being too tight.
I also changed the pattern further, by making the mitts convertible. I used the directions from the ChemKnits tutorial for transforming any mitten knitting pattern into convertible mittens.
After three repeats into the cupcakes on the first mitt, I thought that the thumb as written in the pattern was going to end up making the mitts too tight and not sit correctly, so I made the decision to start adding in a thumb gusset. The end result was a stumpy looking thumb that looked weird and felt wrong. I blocked it so see how it would end up, and had my sister try it on. Immediately I knew I had made the wrong decision with the thumb. I put that completed mitt aside and started the second one, following the pattern.
Although the first mitt ended as a bit of a fail, it had actually knit up quickly once I had started. So I was keen to get going on the second one to get it right. But the one by one twisted rib on 2mm needles broke me and I struggled to get it going. I knew I had a deadline, my sister was waiting for these mitts and now, not only did I have to knit the second one, but I had to go back and see if I could save the first!! But the brain is a funny thing, right? I wanted to cast on other things, or didn't feel like knitting at all. I think if I had no deadline and the first one had been a success I would have been into it and quickly finished the second. But with the weather getting colder and my sister eagerly expecting the finished pair, progress on the second one was slow.
I think I was also dragging on knitting it, because I knew I was going to have to tackle fixing the first one when I was done.
To begin this process I looked to see if I could rip it out from the bind off, but because it had been blocked, the ends were hard to find and it had fused together a bit, not felted, but just difficult to rip out. So I grabbed a pair of scissors and cut the top off the mitts, just above where I needed to restart with the thumb as written in the pattern.
As painful as that was, it ended up being the best option. Once I had taken the plunge, ripping out and picked back up where it needed to be I felt so much better and it took me less then a week to then knit up the rest of the mitt.
Lessons learned:
I am satisfied with the end result and pretty happy with my colour work, but these were a hard slog.
I also changed the pattern further, by making the mitts convertible. I used the directions from the ChemKnits tutorial for transforming any mitten knitting pattern into convertible mittens.After three repeats into the cupcakes on the first mitt, I thought that the thumb as written in the pattern was going to end up making the mitts too tight and not sit correctly, so I made the decision to start adding in a thumb gusset. The end result was a stumpy looking thumb that looked weird and felt wrong. I blocked it so see how it would end up, and had my sister try it on. Immediately I knew I had made the wrong decision with the thumb. I put that completed mitt aside and started the second one, following the pattern.
I think I was also dragging on knitting it, because I knew I was going to have to tackle fixing the first one when I was done.
To begin this process I looked to see if I could rip it out from the bind off, but because it had been blocked, the ends were hard to find and it had fused together a bit, not felted, but just difficult to rip out. So I grabbed a pair of scissors and cut the top off the mitts, just above where I needed to restart with the thumb as written in the pattern.
As painful as that was, it ended up being the best option. Once I had taken the plunge, ripping out and picked back up where it needed to be I felt so much better and it took me less then a week to then knit up the rest of the mitt.
Lessons learned:
- I really do not react well to deadline knitting (when the recipient is expecting the item).
- I should have followed the pattern;
- or at least read it through first - perhaps if I had read the entire pattern I would have started a thumb gusset earlier, preventing the stumpy thumb I created.
- I enjoy the result of colour work and would like to do more, perhaps on a jumper.
Labels:
accessories,
colour,
finished object,
FO,
gifts,
hobbies,
knitting,
learning,
Ravelry,
yarn
Thursday, 11 June 2015
knitrospective - inside my notions bags
This is not so much a look back, but a look inside. Something I have developed over time is the contents of my notions bag. It has gone through many stages. Starting out with not much in it, to bulging at the seams, to a now pared back version of what are my essentials. There is quite a lot jammed into this little bag, but everything is there for a reason.
Let's take a look...
- Tapestry needles - a small plastic case with needles of varying sizes for darning, weaving in ends and grafting
- Zip lock bag of spare yarn - for holding stitches, inserting the spot for an afterthought heel and emergency stitch markers. I keep it in little butterflies in the ziplock bag to stop it getting tangled
- Measuring tape and safety pins - both fairly self explanatory and always come in handy (my marathon running husband has even been happy I take my notions bag with me everywhere as he has needed extra safety pins for his events bibs)
- Emery boards - for fingernail snags but also for needle snags (small rough patches on wooden needles or small imperfections that sometimes occur on the cables of circular needles).
- Three bags of stitch markers

- "Stabby things" - this metal container (also repurposed, originally the case for a stylus pen) holds all my pointy things. Two different sized crochet hooks. A cable needle. Needle threader. Fold up scissors - they take up less space, and if left in a bag with knitting will not snag or cut accidentally. A tapestry needle. I also include in this case a small measuring tape, two stitch holders (not pictured, as they are currently in use on a project I will be talking about on the blog in the next few weeks), a few stitch markers and a pencil. I can then grab this case out and put into a small project bag knowing I have the essentials.

My preference for pencils are these mechanical ones. They do not require a sharpener, draw a precise clean line and have a retractible tip.
The final thing in my bag is the cute little container pictured below. I think of this as my mini notions kit and is perfect for throwing into an "on-to-go" sock project. Light, compact, and useful. In it there is a length of yarn for a lifeline or afterthought heel, a locking stitch marker and a few elastic rings to use as stitch markers.
So, these are the essentials for my notions bag. What do you keep in yours? What tool can you not do without for a project on the go? I think I am at the point that I have the contents of my notions bag set, but interested to see what other people use as there are always new ideas and different ways of approaching things.
Let's take a look...
- Tapestry needles - a small plastic case with needles of varying sizes for darning, weaving in ends and grafting
- Zip lock bag of spare yarn - for holding stitches, inserting the spot for an afterthought heel and emergency stitch markers. I keep it in little butterflies in the ziplock bag to stop it getting tangled
- Measuring tape and safety pins - both fairly self explanatory and always come in handy (my marathon running husband has even been happy I take my notions bag with me everywhere as he has needed extra safety pins for his events bibs)
- Emery boards - for fingernail snags but also for needle snags (small rough patches on wooden needles or small imperfections that sometimes occur on the cables of circular needles).
- Three bags of stitch markers
- a set of the plastic locking markers for holding dropped stitches or marking increases and decreases
- pretty markers; mostly small gauge with beads and some cute dangly sheep - I generally use these ones for marking the beginning of a round, sleeves, back/front etc
- larger, closed rings; that I use for marking pattern repeats - a little repurposing with these ones - they are the rings from old bras that I cut the rings out of
- "Stabby things" - this metal container (also repurposed, originally the case for a stylus pen) holds all my pointy things. Two different sized crochet hooks. A cable needle. Needle threader. Fold up scissors - they take up less space, and if left in a bag with knitting will not snag or cut accidentally. A tapestry needle. I also include in this case a small measuring tape, two stitch holders (not pictured, as they are currently in use on a project I will be talking about on the blog in the next few weeks), a few stitch markers and a pencil. I can then grab this case out and put into a small project bag knowing I have the essentials.
My preference for pencils are these mechanical ones. They do not require a sharpener, draw a precise clean line and have a retractible tip.
The final thing in my bag is the cute little container pictured below. I think of this as my mini notions kit and is perfect for throwing into an "on-to-go" sock project. Light, compact, and useful. In it there is a length of yarn for a lifeline or afterthought heel, a locking stitch marker and a few elastic rings to use as stitch markers.
So, these are the essentials for my notions bag. What do you keep in yours? What tool can you not do without for a project on the go? I think I am at the point that I have the contents of my notions bag set, but interested to see what other people use as there are always new ideas and different ways of approaching things.
Monday, 25 May 2015
Dying for longer colour repeats - Part 2
I am so pleased with how this turned out, especially given that it is my first attempt at longer colour repeats.
As promised last week, here is my dying process, in pictures.
After the skein was dry I was keen to get it back into a shorter skein, but a little worried about how I was going to do this without creating a giant knot! Luckily for me the door handles in my craft room are the perfect distance apart to loop my long skeins around and then wind on to my umbrella swift. I managed to get it wound without any tangles and it didn't take too long.
I am sending this skein to a friend. She had seen the yarn I had dyed to match my winter coat and asked if I could dye her some chunky yarn for a cowl she wanted to knit. I am excited to see how it will knit up.
I now have ideas for trying gradients and self striping, based on what I was able to achieve with my first attempt at longer colour repeats.
My equipment is clearly very basic but for now it works. I am getting results that I am really happy with and having fun along the way.
As promised last week, here is my dying process, in pictures.
After the skein was dry I was keen to get it back into a shorter skein, but a little worried about how I was going to do this without creating a giant knot! Luckily for me the door handles in my craft room are the perfect distance apart to loop my long skeins around and then wind on to my umbrella swift. I managed to get it wound without any tangles and it didn't take too long.
I am sending this skein to a friend. She had seen the yarn I had dyed to match my winter coat and asked if I could dye her some chunky yarn for a cowl she wanted to knit. I am excited to see how it will knit up.
I now have ideas for trying gradients and self striping, based on what I was able to achieve with my first attempt at longer colour repeats.
My equipment is clearly very basic but for now it works. I am getting results that I am really happy with and having fun along the way.
Labels:
colour,
craft,
dreams,
dying,
finished object,
FO,
gifts,
hobbies,
inspiration,
knitting,
Ravelry,
yarn
Thursday, 14 May 2015
knitrospective - socks
For this knitrospective I wanted to look at my journey in sock knitting.
When I first started getting serious about knitting I read quite a lot of blogs, I did not (and still don't) have a knit group so everything I learned was what I found out for myself online.
I really didn't have any fear when it came to trying new things or starting a different kind of project, after all it is just yarn and the worst that can happen is that you rip it out and start again. I did that back then and I still do it now. I have even put terror into a group of people at work, when while knitting at lunchtime I decided that the socks I was working on were not right, so I just pulled out the needles and ripped. Why continue if you know it's not right.
Quite early on I decided that I wanted to knit socks, because it seemed like the thing to do and the idea of hand knit socks really excited me. Everywhere I was reading about "plain vanilla" socks and I thought that this was some magical universal pattern, a secret amongst knitters. I searched the internet, looking for the plain vanilla sock pattern, but nothing had that name. So I found a pattern that sounded simple enough and gave it a go. Only after knitting those socks and more internet research did I actually find out what plain vanilla meant, and that for each person these can end up being completely different. I now have my plain vanilla's - 56sts, 2.75mm magic loop or 2 circs, toe-up, short row heel (knit from the other end of the ball if I don't want to break up the striping pattern), short cuff.
But it does take a while to get to that point with socks, discovering the preferences of the toe shape, cuff length, heel shaping is all very personal and only becomes right with trial and error. I also like to explore new techniques and heels to see if there might be another way I would prefer.
Below are my very first pair of socks. They are pilled, have a hole in the cuff and are not even the same size. But I love them and I use them as bed socks. I don't know what pattern they are knit from (done before Ravelry), I know I knit them on double points, but I clearly had inconsistent gauge, maybe even different stitch counts and didn't understand that I needed to alter the stitch count in order to get socks that fit.
I have since knit eleven pairs of socks that I have listed in Ravelry. And I think at least another four pairs that were knit prior to Rav and gifted. I would not call myself a pro sock knitter, but I do like to always have a pair on the needles and will continue to add to my sock drawer.
When I first started getting serious about knitting I read quite a lot of blogs, I did not (and still don't) have a knit group so everything I learned was what I found out for myself online.
| My current "vanilla socks" |
But it does take a while to get to that point with socks, discovering the preferences of the toe shape, cuff length, heel shaping is all very personal and only becomes right with trial and error. I also like to explore new techniques and heels to see if there might be another way I would prefer.
Below are my very first pair of socks. They are pilled, have a hole in the cuff and are not even the same size. But I love them and I use them as bed socks. I don't know what pattern they are knit from (done before Ravelry), I know I knit them on double points, but I clearly had inconsistent gauge, maybe even different stitch counts and didn't understand that I needed to alter the stitch count in order to get socks that fit.
I have since knit eleven pairs of socks that I have listed in Ravelry. And I think at least another four pairs that were knit prior to Rav and gifted. I would not call myself a pro sock knitter, but I do like to always have a pair on the needles and will continue to add to my sock drawer.
Friday, 1 May 2015
Finished Object - Miranda Sweater
This is the quickest sweater I have ever knit! I just checked my Ravelry page and I shocked myself. I started it on March 10 and finished the knitting on 19 April. I did however swatch for this project about a year ago, so in a way it has still been a long time coming.
Here is a breakdown of the project:
Pattern: Miranda by Josée Paquin
Needles: US 6 (4mm) and US 8 (5mm)
Yarn: Bennett & Gregor Wirraworra - 494 grams
Colourway: Wattlebark - (Brown)
Purchased at: Bendigo Sheep & Wool Festival 2013
With weaving in the ends (not that there were many as I used one giant ball) and blocking it was officially completed on 25 April.
Modifications:
Here is a breakdown of the project:
Pattern: Miranda by Josée Paquin
Needles: US 6 (4mm) and US 8 (5mm)
Yarn: Bennett & Gregor Wirraworra - 494 grams
Colourway: Wattlebark - (Brown)
Purchased at: Bendigo Sheep & Wool Festival 2013
With weaving in the ends (not that there were many as I used one giant ball) and blocking it was officially completed on 25 April.
Modifications:
- added 7 stitches at the underarm and then decreased back over the following 2 rows - I always find that there is a large gap if no stitches are added at the underarm and better to knit the fix into the garment than have to sew up a hole at the end
- I missed a small section of the pattern that asked to knit 4 rows without increases before putting the sleeve stitches on holders. Instead I added the 4 rows without shaping directly below the arm holes. The fit does not seem to be impacted by this
- The pattern was very wordy, which made it more difficult to follow (and hence why I missed the section mentioned above).
- For each section/row I wrote out the number of the pattern repeat row and marked out where the increases would fall. Then as I knit each row I crossed off the pattern row number, to keep track of the middle panel.
- When it came to increasing the front panel I felt the instructions were not 100% clear. The edges may not have worked out perfectly, I just made sure that I read my knitting and followed the pattern as already established as much as possible.
- I used almost all of the 494grams. I knit all of the giant ball and then knit directly from my swatch to finish the second sleeve. I had knit two swatches, one flat and one in the round - if I had only knit one swatch I would have had enough to finish the sweater.
The weather is starting to get cold, so looking forward to an opportunity to wear it. I will try to get an "out in the wild" picture soon, and will post it to instagram.
Thursday, 16 April 2015
knitrospective - most worn/reliable knit acccessory
Recently I bought a wooden chest for the end of the bed, and now all of my knitted items are stored there. As I moved each piece from their previous homes I took time to look over what I have done and the progression that I have made as a knitter. This gave me a renewed look at my knitting as a "body of work" and accompanied with my Ravelry Project Page brings back a lot of memories.
I thought it would be interesting to focus on pieces that I have knit previously, tell their story, how I feel about them now and hopefully get some inspiration from other knitters.
For this knitrospective I am focusing on the accessory (excluding socks) that I wear most regularly and think of as a "go to" piece.
Cowls are definitely my favourite accessory pieces and my most worn/reliable of my cowls is the Fresco Basket Whip Cowl. Interestingly, it was the first cowl I ever knit. And the only reason I knit it was because it was part of a knitalong I joined.
Project Breakdown:
Pattern: Fresco Basket Whip Cowl
Designer: Laura Patterson
Started: 1 November, 2011
Finished: 16 November, 2011
Yarn: Heirloom Easy Care 5ply
Colourway: Blue (No.740)
To be honest, if it had not been for the knitalong I may not have even considered knitting this pattern. But now I grab that cowl to put on more often than any other. It is warm, but not too hot; can be casual or more formal/corporate; and goes with a lot of different outfits and colours.
For the knitters out there - what is your go to knit accessory? Share in the comments or join in on instagram with #knitrospective
I thought it would be interesting to focus on pieces that I have knit previously, tell their story, how I feel about them now and hopefully get some inspiration from other knitters.
For this knitrospective I am focusing on the accessory (excluding socks) that I wear most regularly and think of as a "go to" piece.
Cowls are definitely my favourite accessory pieces and my most worn/reliable of my cowls is the Fresco Basket Whip Cowl. Interestingly, it was the first cowl I ever knit. And the only reason I knit it was because it was part of a knitalong I joined.
Project Breakdown:
Pattern: Fresco Basket Whip Cowl
Designer: Laura Patterson
Started: 1 November, 2011
Finished: 16 November, 2011
Yarn: Heirloom Easy Care 5ply
Colourway: Blue (No.740)
To be honest, if it had not been for the knitalong I may not have even considered knitting this pattern. But now I grab that cowl to put on more often than any other. It is warm, but not too hot; can be casual or more formal/corporate; and goes with a lot of different outfits and colours.
For the knitters out there - what is your go to knit accessory? Share in the comments or join in on instagram with #knitrospective
Subscribe to:
Posts (Atom)











